Grand Caravan V6-3.8L VIN L (2007)
Installation
INSTALLATION
1. Place child restraint seat module in position on seat back (Figure 4).
2. Position seat back hinge interlock lever over the top of the outboard child restraint seat hinge (Figure 1).
3. Install screws attaching child restraint seat module hinges to seat back frame lower rail (Figure 3).
4. Install screws attaching top of module to seat back frame upper rail (Figure 2). Tighten nuts to 7 Nm (62 in. lbs.) torque.
5. Install push in fasteners attaching upper bolster to child restraint seat module (Figure 5).
6. Return seat back to folded position.
7. Install seat back cover.
8. Check belt for smooth operation and verify interlock operation. Recliner should not operate with child seat deployed.
Figure 1 INTERLOCK LEVER
