Grand Caravan V6-3.8L VIN L (2007)
NOTE:
If the front leg cover is not embossed with "Do Not Lift" as shown in (Fig. 13), replace all four front leg covers before continuing to the next step.
29.
While holding the front leg at approximately a 20-45° angle, locate and slide the tip of the front leg cover onto the front leg (Fig. 14).
30.
Push the leg down into the stow position and apply downward force until the cover snaps into place.
31.
Install the inboard front leg cover trim screw.
32.
Install the seat assembly in the vehicle. Refer to the service information available on TechCONNECT, Section 23 Body, Seats, Seat, Installation,
Seat - Third Row - Fold-In-Floor.
Repair Procedure B: Vehicles Built On or After Sept. 17, 2004
1.
Fold all of the second and third row seats into the floor.
2.
Remove the rear seat to floor carpet cover by disengaging the clips, starting from the inboard clip and working towards the outboard clip (Fig. 2).
