Grand Caravan V6-3.8L VIN L (2007)
Installation
INSTALLATION
1. Place side cover in position on seat cushion.
2. If equipped, connect wire connector into power seat switch (Figure 1).
3. Install screw attaching rear of side cover to seat cushion frame. Tighten screw to 1 Nm (9 in. lbs.) torque.
4. Engage J-strap along rear of seat cushion to access screw.
5. Install screws attaching seat cushion side cover to bucket seat (Figure 2).
Figure 1 POWER SEAT SWITCH WIRE CONNECTOR
