Grand Caravan V6-3.8L VIN L (2007)
Figure 1 SECOND ROW CUSHION ATTACHING POINTS
Figure 2 SECOND ROW SEAT CUSHION ASSEMBLY
Removal
REMOVAL
1. Remove seat upper cushion side shield.
2. Lift lock tab on inside of recliner handle with screw driver or special tool C-4755. Slide Recliner handle forward off arm.
3. Remove rear attaching screw, two side attaching screws and two cup holder attaching screws.
4. Remove O/B lower cushion side shield.
Installation
INSTALLATION
1. Place O/B lower cushion side shield into position.
2. Place cup holder into position (if removed previously) and install two cup holder attaching screws.
3. Install rear attaching screw and two side attaching screws.
4. Slide recliner handle rearward onto arm until lock tab engages.