Grand Caravan V6-3.8L VIN L (2007)
Power Sliding Door Switch: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool # C-4755) or equivalent, gently pry the leading upper edge of the B-pillar switch away from the B-pillar trim.
3. Once the upper edge is free from B-pillar trim, rock the switch out of the switch opening.
4. Disconnect the B-pillar switch electrical connector. First, slide the connector lock away from the switch then, depress connector retaining tab while
pulling straight apart.
5. Remove the B-pillar switch from the vehicle.