Grand Caravan V6-3.8L VIN L (2007)
Figure 2 Wiring Harness Connector At ABM
CAUTION: Before removing the brake tubes from the ICU, the ICU must be thoroughly cleaned. This must be done to prevent dirt
particles from falling into the ports of ICU or entering the brake tubes.
10. Thoroughly clean all surfaces of the ICU and brake tube nuts. Use only a solvent such as Mopar(R) Brake Parts Cleaner or equivalent to clean the
ICU.
11. Remove the primary and secondary brake tubes from the inlet ports on the ICU (Figure 3).
Figure 3 Primary & Secondary Brake Tubes At ICU
