Grand Caravan V6-3.8L VIN L (2007)
Wheel Speed Sensor: Description and Operation
ABS SWITCHES/SENSORS
Wheel Speed Sensors and Tone Wheels: One active wheel speed sensor (WSS) is located at each wheel. The sensors use an electronic principle
known as magneto-resistive to help increase performance, durability and low speed accuracy. The sensors convert wheel speed into a small digital
signal. A toothed gear tone wheel serves as the trigger mechanism for each sensor.
The ABM sends 12 volts to power an Integrated Circuit (IC) in the sensor. The IC supplies a constant 7 mA signal to the ABM. The relationship of
the tooth on the tone wheel to the permanent magnet in the sensor, signals the IC of the sensor to toggle a second 7 mA power supply on or off. The
output of the sensor, sent to the ABM, is a DC voltage signal with changing voltage and current levels. The ABM monitors the changing
amperage(digital signal) from each wheel speed sensor. The resulting signal is interpreted by the ABM as the wheel speed.
Because of internal circuitry, correct wheel speed sensor function cannot be determined by a continuity or resistance check through the sensor.
Correct antilock system operation is dependent on tone wheel speed signals from the wheel speed sensors. The vehicle's wheels and tires should all be
the same size and type to generate accurate signals. In addition, the tires should be inflated to the recommended pressure for optimum system
operation. Variation in wheel and tire size or significant variations in inflation pressure can produce inaccurate wheel speed signals; however, the
system will continue to function when using the correct factory mini-spare.
