Grand Caravan V6-3.8L VIN L (2007)
6. If the vehicle is a short-wheel-base model, it will be necessary to loosen and lower the fuel tank far enough to remove the intermediate parking
brake cable.
7. Remove the intermediate parking brake cable from the side brackets and vehicle.
Installation
INSTALLATION
1. Install the ends of the park brake cables through the frame rails and into the side brackets.
2. Install the locking nuts at each end of the cable and securely tighten (Figure 1) (Figure 2).
3. If the vehicle is a short-wheel-base model, it will be necessary to reinstall the fuel tank to its normal mounting position.
4. Install the intermediate parking brake cable on the cable connector at the right rear parking brake cable (Figure 2).
5. Install the intermediate park brake cable on the cable equalizer (Figure 1).
6. Remove the locking pliers from the front park brake cable. This will activate the automatic adjuster and correctly adjust the parking brake cables.
7. Install and position the foam collar on the parking brake cable to prevent it from rattling against the vehicle's floor.
8. Lower the vehicle and apply the park brake pedal 1 time, this will seat the park brake cables.
Figure 1 Parking Brake Cable Attachment To Equalizer
