Grand Caravan V6-3.8L VIN L (2007)
6. To remove the right parking brake cable housing from the body bracket, slide a 14 mm box end wrench over the end of cable retainer to compress
the retaining fingers (Figure 3). The alternate method using an aircraft type hose clamp will not work on the right side of the vehicle.
Figure 3 Right Park Brake Cable Removal From Body Bracket
7. Remove the brake shoes from the brake support plate.
8. Disconnect parking brake cable from parking brake actuator lever.
9. Remove the parking brake cable housing retainer from the brake support plate using a 14 mm wrench to compress the retaining fingers (Figure 4).
Remove the cable.
Figure 4 Removing Park Brake Cable From Brake Support Plate
