Grand Caravan V6-3.8L VIN L (2007)
Crankshaft Main Bearing Seal: Service and Repair
Installation
INSTALLATION
CAUTION: If burr or scratch is present on the crankshaft edge (chamfer), cleanup with 400 grit sand paper to prevent seal damage during
installation of new seal.
1. Place Special Tool 6926-1 magnetic pilot tool on crankshaft (Figure 1).
2. Place seal over Special Tool 6926-1 Pilot. Using Special Tool 6926-2 Installer with C-4171 Handle, drive seal into the retainer housing (Figure 1).
Figure 1 Rear Crankshaft Oil Seal-Installation
3. Install the flex plate.
4. Install transaxle.