dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Air Register|Removal|Page 8491 > < Floor Distribution Ducts|Page 8486
Page 1
background image

Air Register: Service and Repair
Removal

REMOVAL

1.   Using a trim stick (C-4755), pry edge of louver from bezel.

2.   Remove HVAC louver from bezel.

3.   Using a trim stick, pry lower edge of HVAC bezel away from headlining (Figure 1).

4.   Remove louver from vehicle.

Figure 1 REAR HVAC LOUVER

Air Register|Removal|Page 8491 > < Floor Distribution Ducts|Page 8486