dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Removal - Front|Page 8730 > < Removal - Front|Page 8728
Page 2
background image

HEADLINER MOUNTED

5. Disconnect and isolate the negative battery cable.

6. Using a trim stick C-4755 or equivalent, gently pry the rear top edge of the control bezel away from the headliner to release the two retaining clips

(Figure 3).

7. Slide the control bezel reward to remove the rear A/C-heater control and bezel assembly from the headliner and disconnect the wire harness

connector(s) from the back of the control.

Figure 3 Rear A/C-Heater Control - ATC System Shown

8. Remove the three screws that secure the rear A/C-heater control to the bezel and remove the control from the bezel (Figure 4).

Removal - Front|Page 8730 > < Removal - Front|Page 8728