Grand Caravan V6-3.8L VIN L (2007)
6. Carefully cut the foam seal along the parting line of the two halves of the air distribution housing. If the seal is deformed or damaged, it must be
replaced.
7. Remove the seven screws that secure the two halves of the air distribution housing together and carefully separate the housing.
Figure 4 Air Distribution Housing Screws
8. If equipped with dual zone heating -A/C system, push down on the retaining tab of the driver side blend door gear and carefully pull the gear out
of the blend door pivot shaft (Figure 5).
NOTE: If the seal on the air door is deformed or damaged, the air door must be replaced.
9. Remove the blend-air door from the driver side of the air distribution housing.
Figure 5 Dual Zone Driver Side Blend-Air Door
