Grand Caravan V6-3.8L VIN L (2007)
Control Module HVAC: Service and Repair
Rear Blower Motor Power Module - Installation
INSTALLATION
1. Position the rear blower motor power module into the rear HVAC housing.
2. Install the two screws that secure the rear blower motor power module to the rear HVAC housing. Tighten the screws to 2 Nm (17 in.lbs.).
3. Connect the rear HVAC wire harness to the rear blower motor power module.
4. Connect the rear blower motor wire lead to the rear blower motor power module.
5. Install the rear HVAC housing.
