Grand Caravan V6-3.8L VIN L (2007)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal - Front
REMOVAL
NOTE: It is not necessary to discharge the refrigerant system to replace the A/C pressure transducer.
1. Disconnect and isolate the negative battery cable.
2. Disconnect the wire harness connector from the A/C pressure transducer located on the liquid line (Figure 1).
3. Remove the A/C pressure transducer from the fitting on the liquid line and remove and discard the O-ring seal.
Figure 1 A/C Pressure Transducer - Typical
