Grand Caravan V6-3.8L VIN L (2007)
Brake Lamp: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Raise the liftgate.
3. Remove the two retaining fasteners by prying under the head of the fastener with a flat bladed tool (Figure 1).
Figure 1 TAIL LAMP UNIT FASTENERS
4. Rotate the lamp away from the vehicle body to disengage hook from the rubber grommet in the quarter panel opening.
5. Disconnect wire harness connector from tail lamp unit by sliding the red lock, then pressing release tab.
