dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Oil|Capacity Specifications|Page 2040 > < Engine Oil|Capacity Specifications|Page 2038
Page 1
background image

Engine Oil: Service and Repair

ENGINE OIL AND FILTER CHANGE

Change engine oil at mileage and time intervals described in the Maintenance Schedule. 

WARNING: NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID PROLONGED OR REPEATED SKIN
CONTACT WITH ENGINE OIL. CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTERNAL COMBUSTION, CAN BE
HAZARDOUS TO YOUR HEALTH. THOROUGHLY WASH EXPOSED SKIN WITH SOAP AND WATER. DO NOT WASH SKIN WITH
GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS, HEALTH PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE OF USED
ENGINE OIL PROPERLY. CONTACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION CENTER IN
YOUR AREA.

Run engine until achieving normal operating temperature.

1.   Position the vehicle on a level surface and turn engine off.
2.   Open hood, remove oil fill cap (Figure 2).
3.   Hoist and support vehicle on safety stands. 
4.   Place a suitable drain pan under crankcase drain (Figure 1).
5.   Remove drain plug from crankcase (Figure 1) and allow oil to drain into pan. Inspect drain plug threads for stretching or other damage. Replace

drain plug and gasket if damaged.

Figure 1 Engine Oil Drain Plug and Oil Filter

6.   Remove oil filter. 
7.   Install and tighten drain plug in crankcase.
8.   Install new oil filter. 
9.   Lower vehicle and fill crankcase with specified type and amount of engine oil. 

10.   Install oil fill cap.
11.   Start engine and inspect for leaks.
12.   Stop engine and inspect oil level.

NOTE: Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING
listed above.

Engine Oil|Capacity Specifications|Page 2040 > < Engine Oil|Capacity Specifications|Page 2038