Grand Caravan V6-3.8L VIN L (2007)
Body Control Module: Service and Repair
Front Control Module
Removal
REMOVAL
1. Disconnect and isolate the negative and positive battery cables from the battery.
2. Remove the battery.
3. Using a long flat-bladed screwdriver, gently twist the Integrated Power Module (IPM) retaining clip outboard to free the IPM from its mounting
bracket(Figure 1). Rotate IPM upward to access the Front Control Module (FCM) retaining screws.
Figure 1 REMOVING INTEGRATED POWER MODULE
4. Remove the front control module retaining screws.
5. Pull the FCM straight from the PDC assembly to disconnect the electrical connector (Figure 2) and remove the FCM from the vehicle.
Figure 2 FRONT CONTROL MODULE
