dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Refueling Vapor Recovery System|Description and Operation|Page 4474 > < Refueling Vapor Recovery System|Description and Operation
Page 2
background image

If the engine is shut-off while the On-Board diagnostics test is running, low level tank pressure can be trapped in the fuel tank and fuel can not be added
to the tank until the pressure is relieved. This is due to the leak detection pump closing the vapor outlet from the top of the tank and the one-way check
valve not allowing the tank to vent through the fill tube to atmosphere. Therefore, when fuel is added, it will back-up in the fill tube and shut off the
dispensing nozzle. The pressure can be eliminated in two ways: 1. Vehicle purge must be activated and for a long enough period to eliminate the
pressure. 2. Removing the fuel cap and allowing enough time for the system to vent thru the recirculation tube.

Refueling Vapor Recovery System|Description and Operation|Page 4474 > < Refueling Vapor Recovery System|Description and Operation