Grand Caravan V6-3.8L VIN L (2007)
Throttle Body: Service and Repair
Removal
REMOVAL
1. Disconnect negative cable from battery cable.
2. Remove air inlet to throttle body hose clamp.
3. Remove throttle and the speed control (if equipped) cables from lever and bracket.
4. Disconnect electrical connectors from the idle air control motor and throttle position sensor (TPS) (Figure 2) or (Figure 1).
5. Remove throttle body to intake manifold attaching bolts.
6. Remove throttle body and gasket.
Figure 1 IAC VALVE LOCATION 3.3/3.8L
Figure 2 IAC VALVE 2.4L
