Grand Caravan V6-3.8L VIN L (2007)
a.
"Vehicle Flash".
b.
Follow the directions on the DRBIII(R) screen. When the flash process is complete, proceed to the next step.
NOTE:
Due to the PCM programming procedure, a DTC may be set in other modules within the vehicle, if so equipped. Some DTC's may cause the MIL to
illuminate. Check all modules using "Module Scan", record the DTC's, and erase these DTC's prior to returning the vehicle to the customer. Erase
any DTC's in the PCM only after all other modules have had their DTC's erased.
13.
Reset the "Pinion Factor" as necessary.
14.
Perform the transmission Quick Learn Procedure as necessary.
NOTE:
The following step is required by law.
15.
Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label (Fig. 1).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
