Grand Caravan V6-3.8L VIN L (2007)
Power Sliding Door Module: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the appropriate door trim panel from the vehicle.
3. Remove the weather shield.
4. Disconnect the power door control module electrical connectors. Slide the red locking tab out (away from module) and depress connector retaining
tab, while pulling straight apart.
Figure 1 POWER SIDE DOOR COMPONENTS
5. Remove the control module retaining screw (Figure 1).
6. Remove the module from the vehicle.
