Grand Caravan V6-3.8L VIN L (2007)
Figure 1 DRIVER AIRBAG WIRE CONNECTIONS
5. Disconnect the 2-way connector from remote radio control harness.
6. Disconnect the 4-way harness connector from the speed control/horn harness to the clockspring.
7. Remove driver airbag from vehicle.
WARNING: When carrying or handling an undeployed airbag, the trim side of the airbag should be pointing away from the body to
minimize the possibility of injury if accidental deployment occurs. Do not place undeployed airbag face down on a solid surface, the
airbag will propel into the air if accidental deployment occurs. Failure to do this may result in personal injury or death.
Figure 2 VACUUM HEATER AND A/C OUTLETS - TYPICAL
Installation
INSTALLATION
DEPLOYED AIRBAG
1. Perform clean up procedure.
2. Install a new steering column assembly and lower steering column coupler.
3. Install the new clockspring.
4. Connect the 4-way and 6-way connectors between the clockspring and the instrument panel wiring harness.
5. Install the steering column shrouds and connect traction control wire connector (if equipped).
