Grand Caravan V6-3.8L VIN L (2007)
6. Install the steering wheel.
7. Connect the 4-way harness connector to the speed control/horn harness to the clockspring.
8. Connect the 2-way connector to the remote radio control harness.
9. Install the driver airbag and the two screws retaining the airbag. Tighten screws to 10 Nm (90 in.lbs.)
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
UNDEPLOYED AIRBAG
1. Connect the harness connector on the driver airbag trim cover (horn, speed controls) to the clockspring.
2. Connect the squib connectors to the driver airbag.
3. Position the driver airbag into the steering wheel.
4. Install the two screws retaining the airbag. Tighten screws to 10 Nm (90 in.lbs.)
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
