Grand Caravan V6-3.8L VIN L (2007)
Clockspring Assembly / Spiral Cable: Service and Repair
Installation
INSTALLATION
1. Install the clockspring on the column.
2. Connect the 4-way and 6-way connectors between the clockspring and the instrument panel wiring harness.
3. Install the steering column shrouds and connect traction control wire connector (if equipped).
4. Install the steering wheel.
5. Connect the 4-way harness connector to the speed control/horn harness to the clockspring.
6. Connect the 2-way connector to the remote radio control harness (if equipped).
7. Install the driver airbag. Torque the two screws to 10 Nm (90 in.lbs.).
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
