Grand Caravan V6-3.8L VIN L (2007)
Seat Belt Retractor: Service and Repair
Seat Belt And Retractor - Second Row - Right Outboard With Rear HVAC - LWB
Removal
REMOVAL
1. Remove first and second row seats.
2. Remove first row seat belt lower anchor bolt.
3. Remove first row seat belt upper anchor bolt.
4. Remove liftgate sill plate.
5. Remove upper liftgate trim.
6. Remove second seat belt lower anchor bolt.
7. Remove second seat belt upper anchor bolt.
8. Remove D-pillar trim cover.
9. Disconnect speaker connector. The left side has the speaker mounted in the D-pillar trim cover and the right side will have the speaker mounted in
the rear of the quarter trim panel, but the connector is accessible from the rear after the D-pillar trim is removed.
10. Remove quarter trim bolster.
11. Remove quarter trim panel screws.
12. Remove quarter trim panel.
13. Loosen HVAC unit enough to gain access to seat belt retractor fasteners.
a. Remove bracket around HVAC unit (Figure 1).
b. Remove air duct (Figure 2).
c. Remove fasteners attaching HVAC unit to inner quarter panel (Figure 3).
d. Gently pry out on rear HVAC unit to gain access to the seat belt and retractor.
Figure 1 TRIM PANEL MOUNTING BRACKET
