dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Impact Sensor|Removal|Page 9598 > < Impact Sensor|Removal|Page 9596
Page 3
background image

6. Open hood, disconnect and isolate the battery negative cable.

WARNING:  Wait two minutes for the system reserve capacitor to discharge before beginning any airbag component service. Personal
injury or death may result.

7. Open sliding door to the fullest open position.

8. Remove the two retaining screws to the impact sensor (Figure 4).

Figure 4 2ND ROW SIDE IMPACT SENSOR

9. Disconnect the electrical connector from the impact sensor and remove from vehicle (Figure 4).

QUARTER PANEL MOUNTED

10. Open hood, disconnect and isolate the battery negative cable.

WARNING:  Wait two minutes for the system reserve capacitor to discharge before beginning any airbag component service. Personal
injury or death may result.

11. Remove the quarter trim panel for the side of the vehicle that you are replacing the side impact sensor.

12. Remove the two retaining screws to the impact sensor (Figure 5).

Impact Sensor|Removal|Page 9598 > < Impact Sensor|Removal|Page 9596