Grand Caravan V6-3.8L VIN L (2007)
Figure 2 Test Battery Positive Connection Resistance - Typical
3. Connect the voltmeter to measure between the battery positive cable terminal clamp and the starter solenoid B(+) terminal stud (Figure 3). Rotate
and hold the ignition switch in the Start position. Observe the voltmeter. If the reading is above 0.2 volt, clean and tighten the battery positive
cable eyelet terminal connection at the starter solenoid B(+) terminal stud. Repeat the test. If the reading is still above 0.2 volt, replace the
inoperative battery positive cable.
Figure 3 Test Battery Positive Cable Resistance - Typical
4. Connect the voltmeter to measure between the battery negative cable terminal clamp and a good clean ground on the engine block (Figure 4).
Rotate and hold the ignition switch in the Start position. Observe the voltmeter. If the reading is above 0.2 volt, clean and tighten the battery
negative cable eyelet terminal connection to the engine block. Repeat the test. If the reading is still above 0.2 volt, replace the inoperative battery
negative cable.
