Grand Caravan V6-3.8L VIN L (2007)
Alternator Pulley: Service and Repair
Installation
INSTALLATION
1. Install the Generator Decoupler to the generator shaft.
2. Use Special Tool #8433 (Figure 2) to tighten the Generator Decoupler (Figure 1). Refer to the torque chart for the proper torque.
Figure 1 DECOUPLER INSTALLATION (Litens)
3. Install a new decoupler pulley cover.
4. Install the Air Box.
5. Raise vehicle and support.
6. Install accessory drive belt.
7. Install the right front lower splash shield.
8. Lower vehicle.
9. Connect battery negative cable.
Figure 2 SPECIAL TOOL 8433 AND DECOUPLER