Grand Caravan V6-3.8L VIN L (2007)
Power Steering Fluid Cooler: Service and Repair
Installation
INSTALLATION
1. Install the power steering fluid cooler on the cradle crossmember reinforcement (Figure 1). Install the mounting bolts and tighten to 11 Nm (100
in. lbs.).
2. Install power steering fluid hoses on the cooler. Be sure hose clamps are installed on hose past the upset bead on the power steering cooler
tubes.
3. Lower the vehicle to a point where front tires are just off the ground.
4. Fill and bleed power steering system.
Figure 1 Power Steering Cooler
