dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Steering Pump|Pump|Page 8079 > < Power Steering Pump|Description|Page 8076
Page 1
background image

Power Steering Pump: Service and Repair
Pump

Removal

PUMP - 3.3L/3.8L

1.   Remove the (-) negative battery cable from the battery and isolate cable.
2.   Remove the wiper module (unit).
3.   Raise the vehicle. 
4.   Remove the drive belt splash shield.
5.   Remove the pressure hose routing bracket bolt (Figure 1).

Figure 1 PRESSURE HOSE ROUTING CLAMP

6.   lower the vehicle.
7.   Remove cap from power steering fluid reservoir.
8.   Using a siphon pump, remove as much power steering fluid as possible from the power steering fluid reservoir.
9.   Disconnect the pressure hose from the pump (Figure 2).

10.   Disconnect the fluid supply hose from the pump (Figure 2).

Power Steering Pump|Pump|Page 8079 > < Power Steering Pump|Description|Page 8076