dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tie Rod End|Removal|Page 8152 > < Tie Rod End|Removal|Page 8150
Page 3
background image

3.   Snug tie rod jam nut at this time. Do not fully tighten to specifications. Tighten to specifications once toe is set in last step of procedure.
4.   Install front wheel and tire assembly.
5.   Lower vehicle.
6.   Adjust front toe and tighten tie rod jam nut (Figure 5) to 75 Nm (55 ft. lbs.).

Figure 4 Travel Restrictor

Figure 5 Inner To Outer Tie Rod Jam Nut

Tie Rod End|Removal|Page 8152 > < Tie Rod End|Removal|Page 8150