Grand Caravan V6-3.8L VIN L (2007)
Stabilizer Bushing: Service and Repair
Removal
REMOVAL - STABILIZER BAR CUSHION
1. Raise Vehicle.
2. Remove the 2 bolts fastening the emission leak detection pump to the cradle crossmember reinforcement.
3. Move the leak detection pump to the side allowing access to the stabilizer bar cushion retainers.
4. Remove the nut and bolt securing each stabilizer bar cushion retainer to the cradle crossmember (Figure 1) and remove the retainers.
Figure 1 Front Stabilizer Bar Cushion Retainers
5. Remove each stabilizer bar cushion from the stabilizer bar by opening the slit in the cushion and peeling it off the stabilizer bar.