Grand Caravan V6-3.8L VIN L (2007)
Figure 1 Leaf Spring Locator Post
6. Verify that the leaf spring isolator is correctly positioned in the spring plate.
7. Install spring plate in position on the spring (Figure 4).
8. Install spring plate bolts (Figure 4). Tighten bolts to 95 Nm (70 ft. lbs.) torque.
9. Install lower shock absorber bolt. Do not tighten at this time.
10. Remove jack under axle.
11. Lower the vehicle and remove hoist arms and block of wood from under vehicle.
12. Tighten the spring front pivot bolt to 156 Nm (115 ft. lbs.) torque.
13. Tighten rear spring shackle pin nuts to 61 Nm (45 ft. lbs.) torque.
14. Tighten the lower shock absorber mounting bolt to 102 Nm (75 ft. lbs.) torque.
Figure 2 LIFTING POINT AND SPRING MOUNT
