Grand Caravan V6-3.8L VIN L (2007)
Figure 2 Wheel Stud Removal (Typical)
7. Tighten down on Remover, pushing wheel stud out of hub flange. Once shoulder of wheel stud is past flange, remove special tool. Remove nut
from stud and remove stud from hub flange.
Installation
INSTALLATION
1. Install replacement wheel stud into flange of hub and bearing from rear. Install washers on wheel stud, then install a standard type wheel mounting
(lug) nut on stud with flat side of lug nut against washers as shown (Figure 1).
Figure 1 Installing Wheel Stud (Typical)