Grand Caravan V6-3.8L VIN L (2007)
1 - OIL PAN BOLTS (USE RTV UNDER BOLT HEADS)
5. Torque oil pan-to-transaxle case bolts to 19 Nm (165 in. lbs.).
6. Lower vehicle.
7. Connect transmission range sensor connector.
8. Install manual valve lever to manual shaft.
9. Install gearshift cable to manual valve lever.
10. Connect battery negative cable.
11. Fill transaxle with Mopar(R) ATF +4 Transmission fluid.
Removal
REMOVAL
Figure 1 Oil Pan Bolts
1 - OIL PAN BOLTS (USE RTV UNDER BOLT HEADS)
NOTE: If valve body is replaced or reconditioned, the "Quick-Learn" Procedure must be performed.
1. Disconnect battery negative cable.
2. Disconnect gearshift cable from manual valve lever.
3. Remove manual valve lever from manual shaft.
4. Raise vehicle on hoist.
5. Remove oil pan bolts (Figure 1).