Grand Caravan V6-3.8L VIN L (2007)
Clutch Pedal Position Sensor / Switch: Service and Repair
Clutch Pedal Interlock Switch
Removal
REMOVAL
LHD
1. Disconnect battery negative cable.
2. Remove instrument panel lower silencer (Figure 1).
Figure 1 INSTRUMENT PANEL LOWER SILENCER; LHD SHOWN
1 - INSTRUMENT PANEL LOWER SILENCER
3. Remove knee bolster (Figure 2).
Figure 2 KNEE BOLSTER, LHD SHOWN
1 - KNEE BOLSTER
4. Disconnect interlock switch connector (Figure 3).
5. Remove interlock switch by depressing four (4) plastic wing tabs, and sliding switch through mounting bracket (Figure 3). If difficulty is
encountered gaining access to and removing interlock switch, removing the upstop switch/bracket assembly (Figure 3) allows for over-travel of the
pedal, giving more room for interlock switch access.