Grand Caravan V6-3.8L VIN L (2007)
Figure 2 Outer C/V Joint Removal from Interconnecting Shaft
4. Remove outer CV joint from interconnecting shaft using the following procedure: Support interconnecting shaft in a vise equipped with protective
caps on jaws of vise to prevent damage to interconnecting shaft. Then, using a soft-faced hammer (1) (Figure 2), sharply hit the end of the CV
joint housing to dislodge housing from internal circlip (3) on interconnecting shaft. Then slide outer CV joint off end of interconnecting shaft, joint
may have to be tapped off shaft using a soft-faced hammer.
Figure 3 Circlip Removal from Interconnecting Shaft