Grand Caravan V6-3.8L VIN L (2007)
Figure 12 Gearshift Cables at Transaxle
17. Raise vehicle on hoist.
18. Remove crossover cable from engine compartment, then remove cable from passenger compartment through opening in floor pan.
Installation
INSTALLATION
1. From underneath vehicle, install gearshift crossover cable into passenger compartment through floor pan hole. Install remainder of cable into
position in engine compartment.
2. Lower vehicle.
3. Install crossover cable to mount bracket and secure with retainer clip (Figure 1).
Figure 1 Gearshift Cables at Transaxle
