dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Gearshift Boot|Page 6194 > < Transmission Speed Sensor, M/T|Removal|Page 6189
Page 1
background image

Shifter M/T: Service and Repair
Gearshift Boot

Removal

REMOVAL

1.   Remove gearshift knob by pushing down and rotating 1/4-turn clockwise (Figure 1).

Figure 1 Gearshift Knob Removal/Installation

2.   Remove gearshift boot from center console by disengaging three (3) retaining clips (Figure 2).

Figure 2 Gearshift Boot Removal/Installation

Installation

Gearshift Boot|Page 6194 > < Transmission Speed Sensor, M/T|Removal|Page 6189