Grand Caravan V6-3.8L VIN L (2007)
Fluid - Transfer Case: Service and Repair
PTU FLUID CHANGE
NOTE: PTU Fluid should be changed upon servicing the unit, or at the unit's regular scheduled interval.
1. Raise vehicle on hoist.
2. Remove PTU inspection plug (Figure 1).
Figure 1 Inspection Plug
1 - INSPECTION PLUG
3. Using suitable suction gun, draw fluid from PTU. Make sure hose contacts bottom of case to ensure all fluid is removed.
4. Add 1.15 liters (1.22 quarts) of Mopar(R) Gear and Axle Lubricant 80W-90 with suction gun (Figure 2).
Figure 2 Adding Fluid to PTU
5. Install inspection plug and torque to 20 Nm (180 in. lbs) torque.
6. Lower vehicle.
