Grand Caravan V6-3.8L VIN L (2007)
Installation
INSTALLATION
The outer half shaft seal is located on the outside of the end cover. The P.T.U. does not have to be removed to replace this seal.
1. Clean and inspect seal area.
2. Install new seal with seal installer MD998334 (Figure 1).
Figure 1 Seal Installation
3. Reinstall right front half shaft.
4. Check and fill fluids as required.
Removal
REMOVAL
1. Raise vehicle on hoist.
2. Remove rear cover retaining bolts (Figure 1).
Figure 1 Rear Cover Bolts