Grand Caravan V6-3.8L VIN L (2007)
Clutch Pedal Position Sensor / Switch: Service and Repair
Clutch Pedal Upstop Switch
Removal
REMOVAL
LHD
1. Disconnect battery negative cable.
2. Remove instrument panel lower silencer (Figure 1).
Figure 1 INSTRUMENT PANEL LOWER SILENCER, LHD SHOWN
1 - INSTRUMENT PANEL LOWER SILENCER
3. Remove knee bolster(Figure 2).
Figure 2 KNEE BOLSTER, LHD SHOWN
1 - KNEE BOLSTER
4. Remove upstop switch by depressing four (4) plastic wing tabs, and sliding switch through mounting bracket. If necessary, remove mounting
bracket and remove switch (Figure 3).
