dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wiper Module|Page 12999 > < Wiper Module|Page 12997
Page 2
background image

CAUTION:  Do not apply too much force to engage link bushing or damage can occur to the drive link bushing.

9. Position the cowl grille in place.

10. Install the washer hose and grommet into the wiper tub.

NOTE:  Be sure to properly seat the washer hose grommet into the bottom of the wiper tub.

11. Connect the washer hose at the in-line connector located by the air cleaner housing.

12. Install the cowl grille.

CAUTION:  Be careful not to scratch the cowl grille on the corner of the hood.

13. Connect the battery negative cable.

14. Verify that the wiper motor is in the Park position by cycling the wipers system. When done, remove keys from ignition.

15. Install the wiper arms.

16. Align the wiper arms and tighten nuts to 35 Nm (25 ft.lbs.).

17. Install the wiper arm nut caps.

Wiper Module|Page 12999 > < Wiper Module|Page 12997