dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 9869 > < Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 9867
Page 4
background image

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

Technical Service Bulletin # 23-026-08

Date: 

080828

Body - Rear Bumper Fascia Bulge/Bow or Bend

NUMBER: 23-026-08

GROUP: Body

DATE: August 28, 2008

SUBJECT:
Rear Fascia Bow at Top

OVERVIEW:
This bulletin describes procedures to address a Rear Fascia bulge condition along the top surface

MODELS:

2008-2009

(RI)

Town & Country/Grand Caravan

NOTE

This bulletin applies to vehicles built before August 11, 2008 (MDH0811XX).

SYMPTOM/CONDITION:
Some vehicles may have a rear fascia that may exhibit a bulge, bow or bending along the top surface. The scuff pad and/or support on the fascia may
separate due to this bowing. The technician should inspect the scuff pad and fascia support on the rear fascia and based on findings, follow the
appropriate repair procedure in this Service Bulletin.

DIAGNOSIS:
If the vehicle exhibits the Symptom/Condition, perform the Repair Procedure.

Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 9869 > < Body - Rear Bumper Fascia Bulge/Bow or Bend|Page 9867