dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body - Grinding Noise From B-Pillar Area|Page 9986 > < Body - Grinding Noise From B-Pillar Area
Page 2
background image

3. Apply a thin layer of grease along the upper sliding door track approximately eight to ten inches beginning at the front as shown in (Fig. 1).

4. Apply a thin layer of grease along the inner lower sliding door track approximately two to four inches beginning at the rear as shown in (Fig. 2).

Body - Grinding Noise From B-Pillar Area|Page 9986 > < Body - Grinding Noise From B-Pillar Area