Grand Caravan V6-4.0L (2008)
Power Sliding Door Module: Service and Repair
Sliding Door Module Door - Installation
INSTALLATION
1. Install the door module (3) to the sliding door.
2. Install the door module mounting fasteners (1).
3. Install the hold open latch.See: Sliding Door Hold-Open Latch/Service and Repair/Latch-Hold Open/Installation.
4. Connect the exterior door handle cable.
5. Install the front latch and fasteners.
6. Install the rear latch fasteners.
7. Connect the lower electrical connector.
8. Install the door glass.See: Sliding Door Window Glass/Service and Repair/Installation.
9. Install the door trim panel.See: Sliding Door Interior Trim Panel/Service and Repair/Sliding Door Trim Panel/Installation.
10. Install the upper rear molding assembly.
11. Install the interior door handle bezel.See: Sliding Door Interior Trim Panel/Service and Repair/Door - Sliding/Installation.
12. Connect the battery negative cable.
