Grand Caravan V6-4.0L (2008)
6. Carefully unsnap the front door sill plate and sliding door sill plate by lifting the inside edge of the sill plates (Figure 3).
NOTE:
Remove the cap plug and nut at the rear of the front driver side sill plate, before attempting to remove the sill plate (Figure 13).
7. Carefully unsnap the lower "B" post trim panel (Figure 1).
8. Disconnect the power sliding door switch, located on the lower "B" post trim panel, from the body wiring harness connector.
9. Disconnect the 10 way power sliding door wiring harness connector from the sliding door wiring harness connector by first pushing the gray locking
tab upward (downward on the passenger side). Then push down on the release tab while separating the connector (Figure 4).
