Grand Caravan V6-4.0L (2008)
Trunk / Liftgate Latch: Service and Repair
Latch
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate trim panelSee: Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel - Removal.
3. Disconnect the power locking latch cable (1) from the exterior liftgate handle (2) and remove the cable from the handle.
4. Disconnect the power liftgate latch electrical connector (1).
5. Remove the latch retaining screws (3) and remove the latch (2).
Installation
INSTALLATION
1. If a new power liftgate latch assembly is being installed, transfer the power locking latch cable from the original latch to the new latch assembly.
2. Position the power liftgate latch (2) into the liftgate and install the retaining screws (3). Tighten the screws to 11 Nm (95 in. lbs.).
3. Connect the latch electrical connector (1).