dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Wheelhouse Splash Shield - Removal|Page 10485 > < Body - Howl/Honk Noise From A-Pillar/Windshield Area|Page 10478
Page 1
background image

Front Fender Liner: Service and Repair
Front Wheelhouse Splash Shield - Removal

REMOVAL

1. Hoist and support vehicle on safety stands.See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove the push pin fasteners (1) attaching splash shield (2) to body.

3. Remove the screws (2) attaching wheelhouse splash shield (1) to the front and rear of the fender.
4. Remove splash shield (1) from vehicle.

Front Wheelhouse Splash Shield - Removal|Page 10485 > < Body - Howl/Honk Noise From A-Pillar/Windshield Area|Page 10478